**SfC Home > Physics > Gravity >**

Explanation of Gravity Time Equations for Objects Projected Upward by Ron Kurtus - Succeed in Understanding Physics. **Key words:** physical science, initial velocity, project, throw, object, ball, acceleration, displacement, height, time, calculation, square-root, School for Champions. Copyright © Restrictions

## Gravity Time Equations for Objects Projected Upward

by Ron Kurtus (revised 7 February 2011)

When you project an object upward and release it at some initial velocity, it travels until it reaches a maximum height or displacement, after which it falls toward the ground.

The initial velocity has a negative value, the velocity is negative on the way up and positive on the way down, and the displacement is negative above the starting point and positive below the starting point. Velocity and displacement are vectors, while time is a scalar quantity, which is always positive.

Note: Some textbooks consider up as positive and down as negative. You need to be aware of what convention is being used when working from a book.(

See Convention for Direction in Gravity Equations for more information.)

You can use derived equations to find the time it takes to reach a given velocity, as well as the time it takes to reach a given displacement, both above and below the starting point.

Questions you may have include:

- What is the time with respect to velocity?
- What is the time for displacements above the starting point?
- What is the time for displacements below the starting point?

This lesson will answer those questions. Useful tool: Units Conversion

## Time with respect to velocity

The general equation for the time it takes for an object to reach a given velocity is:

t = (v − v_{i})/g

where

**t**is the time in seconds (s)**v**is the vertical velocity in meters/second (m/s) or feet/second (ft/s)**v**is the vertical initial velocity in m/s or ft/s_{i}**g**is the acceleration due to gravity (9.8 m/s^{2}or 32 ft/s^{2})

(

See Derivation of Velocity-Time Gravity Equations for more information.)

When you project the object upward, it is moving in the opposite direction of gravity, and the initial velocity when you release it is negative or less than zero

(**v _{i} <** 0).

### On the way up

On the way up, **v** is negative (**v <** 0), and its absolute value is less than that of **v _{i}**:

|v| < |v_{i}|

where **|v|** and **|v _{i}|** are the absolute or positive values. Thus,

**(v − v**has a positive value.

_{i})### Time to reach maximum displacement

At the maximum displacement, **v =** 0 and the time equation becomes:

t_{m}= −v_{i}/g

where **t _{m}** is the time to reach the maximum displacement.

Note: Since the initial velocity is negative,−vis a positive number._{i}

### On the way down

On the way down, **v >** 0 and **v < |v _{i}|**. Thus,

**(v − v**has a positive value.

_{i})### Example of times to reach various velocities

If **v _{i}** = −128 ft/s, find

**t**for various velocities.

#### Solution

Since **v _{i}** is in ft/s, you use

**g**= 32 ft/s

^{2}. Substitute values for

**v**and

_{i}**g**into the equation:

t = (v − v_{i})/g

t =[(vft/s) − (−128 ft/s)]/(32 ft/s^{2})

Cancelling out units results in the formula:

t =(v+ 128)/32 s

Substitute different values for **v** to get the various elapsed times:

v= −128 ft/st= 0 sStarting off at initial velocity v= −64 ft/st= 2 sMoving upward v= 0 ft/st= 4 s_{m}At maximum displacement v= 32 ft/st= 5 sMoving downward v= 128 ft/st= 8 sDownward at starting point v= 160 ft/st= 9 sBelow starting point

Times for various velocities of object projected upward

## Time for displacements moving upward

The general gravity equation for elapsed time with respect to displacement is:

t = [ −v_{i }± √(v_{i}^{2}+ 2gy) ]/g

where

**±**means plus or minus**√(v**is the square root of the quantity_{i}^{2}+ 2gy)**(v**_{i}^{2}+ 2yg)**y**is the vertical displacement in meters or feet

(

See Derivation of Displacement-Time Gravity Equations for more information.)

For an object projected upward, **−v _{i}** is a positive number. In order for the object to start at

**t =**0 when

**y =**0, the equation for the time it takes an object to move upward toward the maximum displacement is the negative (−) version:

t = [−v_{i}− √(v_{i}^{2 }+ 2gy)]/g

### Time to reach maximum displacement

The equation for the time to reach maximum displacement with respect to the initial velocity has already been stated:

t_{m}= −v_{i}/g

The equation for the maximum displacement with respect to the initial velocity is:

y_{m}= −v_{i}^{2}/2g(

See Displacement Equations for Objects Projected Upward for more information.)

These two equations make it easy to determine the time and maximum displacement. However, you may want to see the relationship between the factors.

Solve **y _{m} = −v_{i}^{2}/2g** for

**v**:

_{i}^{2}

v=_{i}^{2}−2gy_{m}

Square **t _{m} = −v_{i}/g**:

t_{m}^{2}= v_{i}^{2}/g^{2}

Substitute in **v _{i}^{2}** =

**−2gy**:

_{m}

t_{m}^{2}= −2gy_{m}/g^{2}

t_{m}^{2}= −2y_{m}/g

Take positive square root:

t_{m}= √(−2y_{m}/g)

### Example for various displacements moving upward

If **v _{i}** = −98 m/s, find the times for various displacements as the object moves upward to the maximum displacement.

#### Solution

Since** v _{i}** is in m/s,

**g**= 9.8 m/s

^{2}. Also, since the displacements are above the starting point, the values of

**y**will be negative numbers.

You can easily determine the time for the maximum displacement:

t_{m}= −v_{i}/g

t98/9.8 s_{m}=

t10 s_{m}=

Also:

y_{m}= −v_{i}^{2}/2g

y98_{m}= −^{2}/2*9.8 m

y980_{m}= −/2 m

y490 m_{m}= −

You can verify those two values are correct by substituting in:

t_{m}= √(−2y_{m}/g)10 =

√(−2*[−490]/9.8)10 =

√(100)10 = 10

To find the various values of **t** with respect to **y**, substitute for **v _{i}** and

**g**into the equation:

t = [−v_{i}− √(v_{i}^{2 }+ 2gy)]/g

You can independently verify that the units are correct and that **t** is in seconds.

t = [−(−98) −√(−98^{2}+ 2*9.8*y)]/(9.8) seconds

One way to simplify the equation is by breaking up the fraction.

t =98/9.8 −[√(9604 + 19.6y)]/(9.8) s

t =10− [√(9604+19.6y)]/9.8 s

The equation still is not very simple, but it is workable. A simple case is when **
y =** 0:

t =10− [√(9604)]/9.8 s

t =10−98/9.8 s

t =0 s

The following results show the times for various displacements above and at the starting point:

y= 0 mt= 0 sAt the starting point y= −49 mt= 0.5 sMoving up and above starting point y= −98 mt= 1.1 sMoving upward y= −196 mt= 2.25 sMoving upward y= −490 m_{m}t= 10 s_{m}At maximum displacement

Times for various displacements in upward direction

## Time for displacements moving downward

After the object reaches the maximum displacement and starts coming down, the equation changes to:

t = [−v_{i}+ √(v_{i}^{2 }+ 2gy)]/g

While the object is above the starting point, **y** is negative. When it reaches the starting point, **y =** 0. Then, when it is below the starting point, **y** becomes a positive number.

### Example for various displacements moving downward

As in the previous example, if **v _{i}** = −98 m/s. Find the times for various displacements as the object moves downward.

#### Solution

You already know the maximum displacement and time:

y490 m_{m}= −

t10 s_{m}=

Use the equation:

t = [−v_{i}+ √(v_{i}^{2 }+ 2gy)]/g

Substitute and simplify:

t =10+ [√(9604+19.6y)]/9.8 s

The following results show the times for various displacements as the object falls from the maximum displacement:

y= −490 m_{m}t= 10 s_{m}At maximum displacement y= −196 mt= 17.75Falling y= −98 mt= 18.9 sFalling but above starting point y= −49 mt= 19.5 sNearing starting point on way down y= 0 mt= 20 sAt starting point on the way down y= 196 mt= 21.8 sBelow the starting point

Times for various displacements in downward direction

## Summary

An object projected upward against the force of gravity slows down until it reaches a maximum displacement, after which its velocity increases as it falls toward the ground. Derived equations allow you to calculate the time it takes an object projected upward to reach a given velocity or a given displacement from the starting point.

Time with respect to velocity:

t = (v − v_{i})/g

t(time to reach maximum displacement)_{m}= −v_{i}/g

Time with respect to displacement:

t = [−v(moving upward)_{i}− √(v_{i}^{2 }+ 2gy)]/g

t(time to reach maximum displacement)_{m}= √(−2y_{m}/g)

t = [−v(moving downward)_{i}+ √(v_{i}^{2 }+ 2gy)]/g

Be methodical in your calculations

## Resources and references

### Websites

**Gravity Calculations - Earth** - Calculator

### Books

**Top-rated books on Simple Gravity Science**

**Top-rated books on Advanced Gravity Physics**

## Questions and comments

Do you have any questions, comments, or opinions on this subject? If so, send an email with your feedback. I will try to get back to you as soon as possible.

## Share

Click on a button to bookmark or share this page through Twitter, Facebook, email, or other services:

## Students and researchers

The Web address of this page is:

**www.school-for-champions.com/science/
gravity_equations_upward_time.htm**

Please include it as a link on your website or as a reference in your report, document, or thesis.

## Where are you now?

Gravity and Gravitation topics## Gravity Time Equations for Objects Projected Upward